Step Six: Install nozzle bracket mounts to sprayer assembly
Use (4) 5/16 x 1" bolts and (4) 5/16 nuts to attach nozzle bracket mounts. Tighten to 20 ft-lbs.
Step Seven: Attach nozzle bracket to nozzle bracket mounts
Use (8) U-bolts and (8) wing nuts to attach nozzle bracket.
5/16 Nut
Step Eight: Install broadcast nozzles
1. Insert fittings from Y-valve through holes in nozzle bracket. Use (2) nozzle nuts to secure.
2. Thread on (2) nozzle adapters.
3. Thread in the right and left broadcast nozzles. Orient as shown.
Assembly (continued)
5/16 x 1" Bolt
Y-valve
13
U-bolt
Left nozzle
bracket mount
Position
screw at top
Left –
1400PSL
Right –
1400PSR
Nozzle adapter
Nozzle nut
Wing nut
Nozzle
bracket
Right nozzle
bracket mount
Front View
Right broadcast
nozzle – green
Left broadcast
nozzle – 1400PSL