Positioning The Seat - Toro Z255 Operator's Manual

With 52 sfs side discharge mower

Hide thumbs Also See for Z255:

Table of Contents

Center Rollers

Disengage the power take off (PTO) and turn the

ignition key to "OFF". Move controllers to

neutral locked position and apply parking brake.

After adjusting height-of-cut, remove bolt and

flange nut (Fig. 13).

Select hole so gage wheel is positioned to the

nearest corresponding height-of-cut desired

(Fig. 13).

Note:

Do not adjust rollers to support the

deck.

Reinstall the bolt, center rollers and flange nut.

Torque to 40–45 ft–lbs. (54.2–61.0 N m)

(Fig. 13).

Figure 13

1. Center Rollers and Spacer

2. Flange Nut

m–4124

3. Bolt

Positioning the Seat

The seat can move forward and backward. Position

the seat where you have the best control of the

machine and are most comfortable.

To adjust, move the lever sideways to unlock

seat (Fig. 14).

Slide the seat to the desired position and release

lever to lock in position.

Figure 14

1. Adjustment knob

Operation

m–3655

Table of Contents

Z-master 250 series 74204