ABLE OF ONTENTS 1. Before You Begin ..........................3 What is included ............................3 Unpacking Instructions ..........................3 AC Power ..............................3 Contact Us ..............................3 Safety Instructions ............................ 4 2. Introduction ............................4 Features ..............................4 DMX Channel Summary ..........................4 Product Overview............................
Damage to your fixture may result if the line voltage applied does not match the voltage indicated on the voltage selector switch. All fixtures must be connected to circuits with a suitable Earth Ground. Contact Us Wor l d Wi de General Information CHAUVET 3000 North 29 Court Hollywood, FL 33020 voice: 954.929.1115 fax: 954.929.5560...
Never disconnect the power cord by pulling or tugging on the cord. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET at: 954-929-1115. 2. I NTRODUCTION Features...
Allow to cool for 5-15 minutes. Using your hand, press on the button for the breaker, until it remains in place. Note: In the event that this breaker will not reset, contact CHAUVET for troubleshooting. The fixture may need to be serviced.
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter. Note! CHAUVET Model No: DMX5M, or DMX5F. The chart below details a proper cable conversion: IN TO...
3. Then, proceed to connect from the output DMX Input/Output panel of a lighting fixture. as stated above to the input of the following fixture and so on. CHAUVET Certified DMX Data Cables Order Code Description DMX1.5 DMX Cable 1.5m/4.9ft DMX4.5...
Mounting O RI ENT AT I O N This fixture may be mounted in a 90° degree angle only (horizontal), provided there is adequate room for ventilation. RI G G I NG Hanging Clamp It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C”...
4. O PERATING NSTRUCTIONS Operation DMX Mode This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with DMX, please read the DMX Primer in the Appendix of this manual. This fixture will automatically switch to DMX mode operation, once a DMX controller has been plugged into the 3-pin or 5-pin DMX input.
Wired timer remote with LCD screen Function button Lock button Output Timer button button This fixture comes standard with a wired LCD remote. This has the function of manually controlling the product. Or, you can set it to timer function. See the below menu structure for operating this.
Wireless Controller (FC-W) (Optional) This mode will allow you to control the fogger using the optional wireless controller. This consists of the transmitter and the receiver. You may control up to 4 independent fog machines or many more if you run them simultaneously.
Remote does not Make sure connector is firmly connected to device work If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location listed below. Technical Support Address: Service Dept. 3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.) Support (Email): tech@chauvetlighting.com...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’) Returns Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Page 15
WARNING! `Note: All fog machines are prone to clogging due to the thick consistency of fog liquid and the high temperature at which it vaporizes. However, a properly maintained fog machine should provide years of reliable use. Cleaning your fog machine regularly will help reduce costly replacement and repair charges.