Adjusting The Height Adjust Pedal - Scag Power Equipment TURF TIGER II Operator's Manual

R
TENSION
KNOB
Figure 4-10. Adjusting Steering Levers
4. The control handle can also be adjusted in two
different positions. If necessary, remove the two
bolts securing the control handle to the control lever.
Install the handle in the desired position.
4.17 ADJUSTING THE HEIGHT ADJUST
PEDAL
1. Position the seat to the desired location.
2. While in the operator's position without the engine
running, push down on the height adjust pedal to
check for full function control.
3. The height adjust pedal can be located in three (3)
different positions for operator comfort and control.
See Figure 4-11.
TENSION
KNOB
ROT ATE
LEVER
24
Section 4