Flap Adjustment Of The Pick-Up Guide Shaft - JVC XV-N5SL Service Manual

Hide thumbs Also See for XV-N5SL:

Table of Contents

XV-N5SL

4.8 Flap adjustment of the pick-up guide shaft

4.8.1 Tool list for adjustment

Hex wrench for adjustment

Off-the-shelf (1.3mm)

Test disc

VT-501 or VT-502

Stand of about 150mm in height

2 pcs

(1) Puts into the state to display the jitter value on the LCD display referring to "3.5 Display of the jitter value".

(2) A hex-head wrench is inserted in the hole three places for the adjustment in the main body bottom, and the adjustment screw

is turned, and matches so that the jitter value displayed on the LCD display mey become maximum value.

As this value is bigger, the jitter is more allowable in this model.

<POINT>

(1) Turns in the forward or the opposite direction, and makes to the position where the jitter value is good the half rotation of ad-

justment screw a and b(180 degrees) respectively.

(2) Afterwards, adjustment screw b and c are turned in the same way, and makes to the best position.

Table of Contents