Table of Contents
Advertisement
Some models may be equipped with a prop rod or gas struts to assist with easy access to
under bed storage.
Prop Rod (if so equipped)
If your model is equipped with a prop rod:
With the help of a second person, raise the bed platform.
Release the prop rod from its holder.
Put the end of the rod in the bracket under the bed platform.
To lower the platform, release the prop rod from the bracket under the bed plat-
form, re-attach the prop rod to the holder on the bed base,
Lower the platform slowly until closed.
Gas Struts (if so equipped)
On certain models, the bed platform may be equipped with gas struts to assist with easy ac-
cess to storage area.
Grasp the ledge at the foot of the bed and lift carefully.
Two gas struts will hold the bed platform open allowing access to the storage area.
To close, carefully push down on the bed, slowly easing it to the closed position.
Bunk Beds and Bunk Ladders (if so equipped)
Your recreational vehicle may be equipped with bunk style beds. Bunk bed weight ratings
may vary depending on your model and the style of bunk bed. Weight capacities are listed
on the bunk capacity label. Do not exceed the bunk weight capacity.
Bunk Ladders (if so equipped)
Your recreational vehicle may be equipped with a ladder to access the upper bunk. This lad-
der may be a separate steel ladder, or a wooden ladder attached to the bunk beds.
The top of the ladder is secured to the ladder storage compartment. To operate the ladder,
lift up and out of the storage tray. Pivot the bottom of the ladder out. Be sure the ladder is
securely in place on the floor before climbing to the upper bunk.
When storing the wood ladder, place the bottom of the ladder back into the tray in the storage
compartment. This keeps it secure during transport and clear of walkways.The steel ladder
(if equipped) will simply hook onto the upper bunk.
™ NOTE: Some types of bunk beds do not include a ladder.
Table of Contents
Section 12: Interior
129
Advertisement
Table of Contents
