3.6 Deleting-logged-data mode
Within this mode, press the REC key for two seconds while
holding the SET key to remove logged data. After removal,
the unit returns to the previous mode.
3.7 Real-time mode
Measured values are transmitted to a connected PC in real
time in this mode. Controllable only from the software.
4. Operation procedure
Operation procedure of the datalogger is as follows. Perform each setting and
operation with the dedicated software.
Power on
Display measured value
Set ID
Set current date & time
Set logging interval
Set logging option
Set alarm
Set preset start
Start logging
Preset start