SATO SK-L750 Series Instruction Manual page 13

3.2 Setting mode
Used to set various functions.
To enter this mode, press the MODE key while in measurement mode or in
standby for preset start.
You can set some functions by using the keys on the unit: alarm (ON/OFF),
logging interval, logging option and preset start (ON/OFF). Use the dedicated
software to make detailed settings.
If no key is operated for one minute, the unit returns to measurement mode with
the setting values at which the REC key was last pressed.
Note: Any change in the setting value is confirmed by pressing the REC key. If
the MODE key is pressed instead of the REC key to move to another
setting item, the change will not be updated.
• Default Settings
The default settings are as follows. Set each setting with the dedicated
software according to your usage.
Note: For SK-L753, the default date is "2021.1.1" (year, month, day).
Item
ID
Year/Month/Date
Time
Logging interval
Logging option
CH1 Upper alarm
CH1 Lower alarm
CH2 Upper alarm
CH2 Lower alarm
Preset start
Key lock
Setting
000000
2018.1.1
0:00
1 minute
Once
OFF
OFF
OFF
OFF
OFF
OFF