Connect And Charge - Motorola nursery PIP12 TRAVEL Quick Start Manual

4. Connect and charge

WARNING
• Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH
rechargeable batteries) supplied with your PIP12 TRAVEL.
• Strangulation Hazard. Children have STRANGLED in cords. Keep adapter
cords out of the reach of children (more than 1 metre away). Never use
extension cords with AC adapters. Only use the AC adapters provided.
Note
When charging the batteries for the first time, charge for at least 16 hours
continuously. After charging for the first time, subsequent charging time is
about 8 to 10 hours a day. Fully charged batteries should give up to 10 hours
usage time.
Baby unit
Install batteries
1. Lift up the battery cover to remove it from the baby unit.
2. Insert the rechargeable Ni-MH battery cells supplied. Note the '+' and
'-' markings beside the battery compartment and insert in the correct
direction.
3. Place the battery cover back into place.
Connect the baby unit
1. Plug the DC plug of the power adapter into the DC jack on the side of the
baby unit and plug the other end of the AC adapter into the AC power outlet.
2. Switch on the AC power (if your AC power outlet has a switch). The battery
5