Connect And Charge - Motorola PIP12 TRAVEL Quick Start Manual

F Power jack
G Power / battery charging / Linking LED indicator
•
It lights up in red first and becomes green when powered on.
•
It flashes green when the parent and baby units are not linked with each
other.
•
When the parent unit is powered off and has the power jack plugged
in, it lights up in red when the batteries are charging and it flashes red
when the batteries are not installed. It turns dim when the batteries are
fully charged.
•
When the parent unit is powered on and has not the power jack plugged
in, it flashes red when the battery level is low.
•
When the parent unit is powered on and has the power jack plugged
in, it is green and the batteries keep charging. (Note: the parent unit is
required to have batteries installed even when it is powered by the AC
power adapters.)
H Mute / Sound alert LED indicator
It lights up in red when the speaker is muted. Then it flashes red when a
loud sound is detected by the baby unit.
I Battery compartment
4.

Connect and charge

WARNING
• Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH
rechargeable batteries) supplied with your PIP12 TRAVEL.
• Strangulation Hazard. Children have STRANGLED in cords. Keep adapter
cords out of the reach of children (more than 1 metre away). Never use
extension cords with AC adapters. Only use the AC adapters provided.
Note
When charging the batteries for the first time, charge for at least 16 hours
continuously. After charging for the first time, subsequent charging time is
about 8 to 10 hours a day. Fully charged batteries should give up to 10 hours
usage time.
4.1 Baby unit
Install batteries
5