Table of Contents
Advertisement
6. Using the digital audio baby monitor
6.1
Turn the baby unit on / off
•
Press and hold
indicator lights up in green.
•
Press and hold
LED indicator will turn off.
6.2
Turn the parent unit on / off
•
Press and hold
indicator lights up in red first and becomes green.
•
Press and hold
beep sound. The power / linking LED indicator will turn off.
Notes
•
If you place the parent and baby units too close together, you may hear a
high pitched noise. Move the units further apart or decrease the volume of
the parent unit.
•
If the power / linking LED indicator flashes on the parent unit, they are not
linked to each other. Make sure both units are powered on, and the distance
between the parent and baby units is within the operating range.
6.3
Adjust the speaker volume on the parent unit
+
-
Press
or
to increase or decrease the volume. It has 5 volume levels and
mute.
6.4
Mute the speaker
-
Press
continuously until the volume level changes to mute or press and hold
-
to mute the speaker. The mute / sound alert LED indicator on the parent unit
will light up in red. You can unmute it by pressing
6.5
Sound alert
When the speaker of the parent unit is muted and a loud sound is detected by
the baby unit, the mute / sound alert LED indicator will flash red.
6.6
Talk back
+
Press and hold
green, speak to your baby through the microphone of the parent unit. Release
the button when you finish speaking.
8
on the baby unit to turn it on. The power / linking LED
on the baby unit again to turn it off. The power / linking
on the parent unit to turn it on. The power / linking LED
on the parent unit again to turn it off. You will hear a
on the parent unit. When the power LED indicator flashes
+
and the LED turns OFF.
Advertisement
Table of Contents
