Sewing Speed Control - Singer 398054 Operation And Safety Notes

SEWING SPEED CONTROL

Sewing speed is set by using the sewing
speed control. The sewing speed control is
moved horizontally to determine the amount
of speed required.
Regardless of the setting, maximum speed
may be limited depending on which pattern
has been selected.
NOTE:
When using the foot control, if the sewing
speed control is set on the lower setting, the machi-
ne will not sew faster than the speed at which the
speed control is set, even when the foot control is
fully depressed.
HELPFUL MESSAGES
If an incorrect operation is made, a helpful message will be displayed. When a helpful message is dis-
played, fix the problem following the instructions below.
The bobbin winder is moved to the right.
• Move bobbin winder to left when it is not used.
Buttonhole lever is not lowered or raised.
• Lower buttonhole lever when sewing buttonholes.
• Raise buttonhole lever when sewing stitch
patterns.
Machine is locked up due to thread entangled with
bobbin case or rotation interrupted forcibly.
• Sluk for hovedafbryderen og løs problemet, som
har ført til at symaskinen ikke fungerer.
Audible signal
Beep
Beep-beep
Beep-beep-beep
Beep-beep-beep-beep-beep
Slow
The buzzer sounds when
Normal operation
Invalid operation
Invalid machine setting
The machine is jammed
Fast
EN– 19