Singer 398054 Operation And Safety Notes page 111

MORE DECORATIVE STITCHES
SETTINGS: Presser foot - All Purpose Foot (J)
or Satin Stitch Foot (Z)
Thread tension control - 4 or 3
Following are examples of how to use and
sew these stitches. You can use some other
decorative stitches in the same way.
You should carry out a test sewing on an extra
piece of the fabric to check the decorative
pattern and make any adjustments desired.
Before starting to sew, check that there is
enough thread wound onto the bobbin to
ensure that the thread will not run out during
sewing.
For best results, stabilize fabric with a tear-
away or wash-away stabilizer underneath
when stitching.
Helpful Hint: Bobbin thread should not appear
on the top side of the fabric, so it may be nece-
ssary to slightly lower the tension setting.
EN– 31