Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds; Searching For A Specific Sequence - Samsung DVD-V52 Instruction Manual

00046E DVD-V52/XST-GB2 11/9/02 11:12 AM Page 24
VCR

Playing a Sequence Frame by Frame

GB
1
1
VCR

Playing a Sequence at Variable Speeds

1
1
24
You can:
Stop the cassette at a given frame (image)
Advance one frame at a time
No sound is heard when playing back frame by frame.
1
Press:
ll to start playing the cassette
ll to still the tape at a given frame
Press F.ADV/STEP ( ) to advance frame by frame
2
To return to normal playback, press ll.
When you have been using the still function for more
than about five minutes, the DVD-VCR will automatically
play to protect the cassette and video heads.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
) buttons to minimize this effect.
( ,
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson's technique,
movement by movement.
The Shuttle function is available on the Remote control
No sound is heard when playing a sequence at variable
speeds.
1
Press:
ll during playback
SHUTTLE ( ) to play the cassette backwards
SHUTTLE ( ) to play the cassette forwards
2 Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE SLOW SLOW PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3
X9 X5 X3 X1/10 X1/5

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
Prev
Seq.
etc.
2 1
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INTRO SCAN
1 To search for a specific index, press INDEX.
2 Press the
or buttons depending on the direction
where your desired programme is located.
3
When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
4 If you want to watch the tape from a particular Index, simply press
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1
Press the INDEX to start the Index search.
2
Press the or buttons twice more. This will take
you directly to the start of the desired programme is located.
3
These Index searches can be made forwards: (press
backwards: (press
4
To cancel an Index search simply press the
PLAY PLAY
X5 X9
You can set an index number up to ±20.
Seq. being Next
played Seq. etc.
1 2
.
II
) or
).
II or button.
VCR
GB
1
INDEX :
INTRO SCAN :
INDEX SEARCH : - 6
2
2
25