Table of Contents
Advertisement
Auto programmes
Sound control
Master / slave mode
In this operating mode you select one of the automatic programmes and adjust the
running speed of the automatic programme.
1.
Press [SET] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows 'Running Mode' and confirm the
selection with [SET].
3.
Press [UP] or [DOWN] until the display shows 'Auto' and confirm the selection
with [SET].
4.
Press [UP] or [DOWN] to select the desired submenu or the desired value and
confirm the selection with [SET].
The following sub menus are available:
Menu level 3
Menu level 4
'Program 1...
Program 8'
'Speed'
'Master
Brightness'
In this mode, the unit follows the rhythm of the background music or sounds
detected by the built-in microphone.
1.
Press [SET] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows 'Running Mode' and confirm the
selection with [SET].
3.
Press [UP] or [DOWN] until the display shows 'Sound' and confirm the selection
with [SET].
4.
Use [UP] or [DOWN] to select one of the programmes 'Program 1' ... 'Program 8'
and confirm the selection with [SET].
ð The sound control is activated.
5.
Use [UP] or [DOWN] to select a microphone sensitivity between '000' (sound
control off) ... '100' (high microphone sensitivity) and confirm the selection
with [SET].
6.
Use [UP] or [DOWN] to select overall brightness between '000' (dark) ... '100'
(bright) and confirm the selection with [SET].
To use a device as the master device, select one of the automatic programmes, acti‐
vate the sound control or the manual control. Connect the slave devices to the DMX
output of the master device and select the DMX mode.
Description
Automatic programme 1...8
'0...100'
Running speed from slow to fast
'0...100'
Overall brightness
Operating
Hero Wash 300 FC
17
moving head
Advertisement
Table of Contents
