Siemens RUGGEDCOM RSG2488F Installation Manual page 57

RUGGEDCOM RSG2488F
Installation Guide
Test
IEC 60255-5
a
Siemens-specified severity levels
EMC Immunity Type Tests per IEEE 1613
NOTE
The RSG2488F meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for
copper ports. Class 1 allows for temporary communication loss, while Class 2 requires error-free and
interrupted communications.
HV Impulse
Dielectric Strength
Fast Transient
Oscillatory
Radiated RFI
ESD
EMC and Environmental Type Tests
Description
Dielectric Strength
HV Impulse
Description
Signal Ports
DC Power Ports
AC Power Ports
Signal Ports
DC Power Ports
AC Power Ports
Signal Ports
DC Power Ports
AC Power Ports
Earth Ground Ports
Signal Ports
DC Power Ports
AC Power Ports
Enclosure ports
Enclosure Contact
Enclosure Air
100% for 0.05 s
Signal Ports 2 kVAC (Fail-Safe
Relay Output)
DC Power Ports
AC Power Ports
Signal Ports 5 kV (Fail-Safe
Relay Output)
DC Power Ports
AC Power Ports
5 kV (Failsafe Relay Output)
2.5 kV Common Mode @ 1MHz
1 kV Differential Mode @ 1 MHz
Test Levels Severity Levels
1.5 kVDC
2 kV
5 kV
Test Levels
5 kV
2 kV
1.5 kVDC
2 kV
± 4 kV @ 2.5 and 5 kHz
± 4 kV @ 5 kHz
2.5 kV Common Mode
35 V/m
± 2 kV
± 4 kV
± 8 kV
± 4 kV
± 8 kV
± 15 kV
Chapter 6
Certification
47