Siemens RUGGEDCOM RSG2488F Installation Manual page 31

RUGGEDCOM RSG2488F
Installation Guide
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. Make sure to remove the microSD
card before decommissioning the device or sending the device to a third-party.
To insert or remove a microSD card, do the following:
1. Power down the device.
2. Unscrew the retention screws and remove the access plate.
Figure 16: Inserting/Removing a MicroSD Card
1. Access Plate 2. MicroSD Card
3. Without touching the contacts on the card, insert or remove the microSD card.
4. Install the access plate and finger-tighten the retention screws.
5. Power up the device.
Inserting/Removing the MicroSD Card
2
1
Chapter 3
Device Management
21