Symbols In This Manual; What's In The Box; Symbols On The Product - Ryobi OLP1832BP Instructions Manual

maintenance or repairs before using the product.
● Always clean the cutting blades after operation.
● Visually check the condition of the cutting edges
of the cutting blade.
when the cutting edges become dull.
blade should be properly repaired or replaced by an
authorised service centre.
● Store the product and make sure that the cutting
mechanism has stopped before setting the product
down.

WHAT'S IN THE BOX

See page 6.
■ Pole lopper x 1
■ Blade cover x 1
■ Harness x 1
■ Operator's manual x 1

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye protection, hearing protection,
and head protection.
Wear non-slip, heavy duty protective
gloves.
Wear non-slip safety footwear when
using the product.
Do not expose to rain or damp
condition.
Beware of overhead power lines. Never
operate the product with the cutting
means closer than 10 m from overhead
power lines.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15m away from the
operating area.
To prevent serious injury, do not touch
cutting blades.
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
4
Sharpen or replace the blade
Any damaged
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Note
Warning
Parts or accessories sold separately