Preliminary Examination; Specifications - Hanna Instruments HI9810372 Instruction Manual

Wireless ph tester for skin & scalp
Table of Contents

Advertisement

1. PRELIMINARY EXAMINATION

Remove the tester and accessories from packaging and examine them carefully. For further assistance, please contact your
local Hanna Instruments office or email us at tech@hannainst.com.
Each
HI9810372
is supplied with a starter kit consisting of:
• pH 4.01 buffer solution, 20 mL sachet (2 pcs.)
• pH 7.01 buffer solution, 20 mL sachet (2 pcs.)
• Cleaning and disinfection solution for skin residuals, 20 mL sachet (1 pc.)
• Electrode cleaning solution for skin grease and sebum, 20 mL sachet (1 pc.)
• Electrode storage solution, 13 mL dropper bottle (1 pc.)
• 3V Lithium battery – CR2032
• Instrument quality certificate and Instruction manual
Note: Save all packing material until you are sure that the tester works correctly. Any damaged or defective item must be
returned in its original packing material with the supplied accessories.

2. SPECIFICATIONS

Range
Resolution
Accuracy
Calibration
Temperature compensation Automatic (ATC) or Manual (MTC) *
Electrode
Battery type
Battery life
Environment
Casing
Dimensions / Weight
* Available with Hanna Lab App
** Measuring outside the recommended operating temperature range may damage the gel electrolyte and void product warranty.
Note: The tester can display measurements from
4
case assess the integrity of the tester and the type of measured sample.
pH
0.00 to 12.00 pH
mV *
pH/mV conversion
Temperature ** 0.0 to 50.0 °C (32.0 to 122.0 °F)
pH
0.01 or 0.1 pH
mV *
0.1 or 1 mV
Temperature
0.1 °C; 0.1 °F
pH
±0.05 pH
Temperature
±0.5 °C; ±0.9 °F
Up to three points or four points *
Automatic buffer recognition with Standard buffers
Hanna (pH 1.68 *, 4.01, 7.01, 10.01) or NIST (pH 1.68 *, 4.01, 6.86, 9.18)
Body material
Glass
Junction
Reference cell
Electrolyte
Tip / Shape
Outer diameter
Length
3V Lithium – CR2032
Approximately 1000 hours (500 hours with Bluetooth enabled)
0 to 50 °C (32 to 122 °F)
IP65 ingress protection
51 x 150 x 21 mm (2.0 x 5.9 x 0.8") / 50 g (1.8 oz.)
2.00 to 16.00 pH. Measurements outside of the pH range will flash. In this
Glass
Low Temperature (LT)
Open
Double, Ag/AgCl
Viscolene
Flat
12 mm (0.47")
75 mm (2.95")

Advertisement

Table of Contents
loading

This manual is also suitable for:

Halo 2

Table of Contents