Summary of Contents for Hanna Instruments HI9810372
Page 1
HI9810372 Wireless pH Tester for Skin & Scalp with built-in specialized electrode...
Page 2
Dear Thank you for choosing a Hanna Instruments product. Please read this instruction manual carefully before using this instrument. Customer, This manual will provide you with the necessary information for correct use of this instrument, as well as a precise idea of its versatility.
1. PRELIMINARY EXAMINATION Remove the tester and accessories from packaging and examine them carefully. For further assistance, please contact your local Hanna Instruments office or email us at tech@hannainst.com. Each HI9810372 is supplied with a starter kit consisting of: • pH 4.01 buffer solution, 20 mL sachet (2 pcs.) •...
3. GENERAL DESCRIPTION & INTENDED USE HI9810372 is a professional wireless pH tester, part of Hanna Instruments HALO2 family. • The integrated Bluetooth module allows the tester to be connected to a compatible smart device with the Hanna Lab App.
5. GENERAL OPERATIONS Turning the Tester On & Off • Turn the tester face down on a clean, dry surface. Rotate the battery cover on the back of the tester counterclockwise and set it aside. Remove the battery insulation film. •...
Bluetooth Pairing Option: dEL PAIr Press ON/OFF button to delete saved paired & PAIR device. Date & Time Option: SEt TIME 2021 Press ON/OFF button to set the date and time. YEAR Option: YEAR, MO, DAY, HOUR, and MIN Use the Setup button to select the option and press the ON/OFF button to change the selected option. 7.
Stand-Alone Tester (Up to Three-Point Calibration) 1. Rinse the electrode tip with purified water and blot dry. Then rinse with the buffer being used for calibration. 2. Press and hold ON/OFF button until “ ” is displayed. CAL MODE 3. When “ ”...
10. CARE & MAINTENANCE • Never immerse the tester over the maximum immersion level. • Fresh buffers should be used for each calibration. Once the sachets are opened the buffer value can change over time. • If the electrode is slow or sluggish, soak it in cleaning solution for 20 minutes. Rinse with water and hydrate the electrode in storage solution for a minimum of 30 minutes before calibrating.
When shipping any product, make sure it is shipped back in compliance with shipping regulations, thoroughly cleaned and free of any chemicals, and is properly packaged for complete protection. MAN9810372 10/21 Hanna Instruments reserves the right to modify the design, construction or appearance of its products without advance notice.
CERTIFICATION All Hanna Instruments conform to the CE European Directives. Disposal of Electrical and Electronic Equipment. The product should not be treated as household waste. Instead, hand it over to the appropriate collection point for the recycling of electrical and electronic equipment, which will conserve natural resources.
Page 12
World Headquarters Hanna Instruments Inc. Highland Industrial Park 584 Park East Drive Woonsocket, RI 02895 USA www.hannainst.com MAN9810372 Printed in ROMANIA...