Daikin RX-W Series Service Manual page 108

BRC082A41W, BRC082A42W(S)
DISPLAY (SIGNAL TRANSMISSION)
1
This lights up when a signal is being transmitted.
DISPLAY , ,
2 (OPERATION MODE)
This display shows the current OPERATION MODE.
DISPLAY
3
This display shows the set temperature.
DISPLAY
4
This display shows PROGRAMMED TIME of the
system start or stop.
5
DISPLAY (SWING FLAP)
DISPLAY
6
The display shows the set fan speed.
DISPLAY /TEST
(INSPECTION/TEST OPERATION)
7
When the INSPECTION/TEST OPERATION button is
pressed, the display shows the system mode is in.
ON/OFF BUTTON
8 Press the button and the system will start. Press the
button again and the system will stop.
FAN SPEED CONTROL BUTTON
9
Press this button to select the fan speed, LOW,
MEDIUM or HIGH, of your choice.
TEMPERATURE SETTING BUTTON
10
Use this button for setting temperature.
102
, ,
(SET TEMPERATURE)
(PROGRAMMED TIME)
(FAN SPEED)
11 TIMER MODE START/STOP BUTTON
TIMER RESERVE/CANCEL BUTTON
12
13 AIRFLOW DIRECTION ADJUST BUTTON
OPERATION MODE SELECTOR BUTTON
14
Press this button to select OPERATION MODE.
FILTER SIGN RESET BUTTON
15
INSPECTION/TEST OPERATION BUTTON
16
This button is used only by qualified service persons
for maintenance purposes.
EMERGENCY OPERATION SWITCH
17
This switch is readily used if the remote controller does
not work.
RECEIVER
18
This receives the signals from the remote controller.
OPERATION LAMP (Red)
19
This lamp stays lit while the air conditioner runs. It
blinks when the unit is in trouble.
TIMER LAMP (Green)
20
This lamp stays lit while the timer is set.
AIR FILTER CLEANING TIME INDICATOR LAMP
(Red)
21
Lights up when it is time to clean the air filter.
DEFROST LAMP (Orange)
22
Lights up when the defrosting operation has started.
SiUS092230EA
R5000166
Part 5 Remote Controller