Putting the RS 195 into operation
Check the menu of your TV for information on how to deactivate the
muting function or adjust the volume. Alternatively, connect the TV
and the transmitter using a different connection possibility (A or C).
Connection possibility C: RCA sockets (analog)
C
b
Plug the RCA adapter onto the stereo audio cable.
b
Connect the stereo audio cable to the 3.5 mm jack socket of the
transmitter.
b
Connect the RCA plugs to the RCA outputs of your audio source
(usually marked "AUDIO OUT"). Connect the red plug to the red
RCA socket and the white plug to the white or black RCA socket.
Analog
* optional accessory
Connecting the transmitter to the power supply
system
1
Select a suitable country adapter and slide it onto the power sup-
ply unit until it clicks audibly into place.
2
Connect the connector of the power supply unit to the connection
socket of the transmitter.
3
Plug the power supply unit into the wall socket.
The TR status LED
transmitter is in standby mode.
L
*
on the transmitter lights up briefly. The
OFF
R
RS 195 | 15