Brother PJ-600 Series Command Reference Manual page 50

Name
Syntax
Description
Name
Syntax
Description
Name
Syntax
Description
Name
Syntax
Description
© 2015 Brother Industries, Ltd. All Rights Reserved.
Brother PJ-600/700/800 Series Command Reference 47
Definition of {n1}
00h: None ~ 48h: 12 hours
Switching between saving and discarding when pages are carried over
ESC + i+ DC1 + S + S + 01h + 01h + 00h + {P1}
Printing when pages are carried over
Definition of {P1}
00h: Print
01h: Discard
Adjusting the transport distance at the end of a job
ESC + i + DC1 + S + D + 01h + 01h + 00h + {P1}
Adjusting the transport distance at the end of a job. This command takes effect
only when "Roll Printer Case Setting" is specified as "04h: On (Custom Option)".
Definition of {P1}
0000h ~ FFFFh: Transport distance at the end of a job
Specify the adjustment value (number of pulses) as a signed integer. (-32,768
～+32,768)
1 pulse is about 0.0423 mm.
Lead position adjustment
ESC + i + DC1 + S + F + 01h + 01h + {P1}
Lead position adjustment. This command takes effect only when "Roll Printer
Case Setting" is specified as "04h: On (Custom Option)".
Definition of {P1}
0000h ~ FFFFh: Lead position adjustment value
Specify the adjustment value (number of pulses) as a signed integer. (-32,768
～+32,768)
1 pulse equals about 0.0423 mm.
Time setting for "Pause to cut every". 1 second
ESC + i + DC1 + S + C + 01h + 01h + 00h + {P1}
Time setting for "Pause to cut every".
Definition of {P1}
00h: None ~ FFh: 255 seconds