Brother PJ-600 Series Command Reference Manual page 44

Name
Syntax
Description
Name
Syntax
Description
© 2015 Brother Industries, Ltd. All Rights Reserved.
Brother PJ-600/700/800 Series Command Reference 41
Auto Adjust Sensor
ESC + ~ + e + C + {n1}
1B H + 7E H + 65 H + 43 H + {n1}
Automatically adjusts the threshold for the sensor that detects the paper. The
machine that receives this command feeds the paper and detects the black mark.
After this command is sent, notification of the results is returned as 2 bytes.
Definition of {n1}
01 H(1): Perform automatic adjustment
Notification of results
・First byte
00 H(0): Failed
01 H(1): Succeeded
・Second byte
Specified paper sensor threshold value if succeeded
ex) 1B H 7E H 65 H 43 H 01 H (perform automatic adjustment)
・Reception example of notification of results 1: 00 H
→Failed to perform automatic adjustment.
・Reception example of notification of results 2: 01 H 96 H
→Succeeded in performing automatic adjustment, and set the value to 150.
Factory Reset
ESC + ~ + R
1B H + 7E H + 52 H
Returns the unit to its manufacturer default settings.
Overwrites the settings in both the non-volatile memory and RAM with the
manufacturer default settings.
If the current settings are the same as the manufacturer default settings, they are
not overwritten.
Then, the reset can be saved on the machine if the "initialize" command is sent.