Brother PJ-600 Series Command Reference Manual page 25

Name Set print speed
Syntax ESC +
1B H + 7E H + 65 H + 56H + 01H + {n1}
Description Specifies the print speed.
For details, refer to the respective commands for
PJ-600 series are not available.
Name Set roll printer case setting
Syntax ESC +
1B H + 7E H + 65 H + 52H + 01H + {n1}
Description Specifies the feed setting when using roll printer case.
For details, refer to the respective commands for
PJ-600 series are not available.
Name Set form feed mode
Syntax ESC +
1B H + 7E H + 66 H + {n1}
Specifies the operation that is performed when the "Form Feed" command is received.
Description
Definition of {n1}:
0: No Feed
1: Fixed Page (default)
2: End of Page
3: End of Page Retract
[Details]
No Feed:
A page feed is not performed, even if the "Form Feed" command is received.
Fixed Page:
The page is fed the number of lines specified with the "set paper height" or "set
paper length" command.
End of Page:
The paper is fed until the end of the page is detected. However, this is a maximum of
14 inches.
End of Page Retract:
The paper is fed until the end of the page is detected, and then the paper is
readjusted to the starting position.
Name Set dash line print
© 2015 Brother Industries, Ltd. All Rights Reserved.
Brother PJ-600/700/800 Series Command Reference 22
~ + e + V + 01 + {n1}
~ + e + R + 01 + {n1}
~ + f + {n1}
PJ-700 series and PJ-800
PJ-700 series and PJ-800
series.
series.