Power Button With Fingerprint Reader (Optional); Removing The Power Button With Optional Fingerprint Reader - Dell P138G Service Manual
Hide thumbs
Also See for P138G:
- Service manual (139 pages) ,
- Setup and specifications manual (30 pages) ,
- Re-imaging manual (18 pages)
Table of Contents
Advertisement
Steps
1. Align and place the power button on the palm-rest assembly.
2. Replace the (M2x2) screw to secure the power button to the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the fan.
3. Install the
WWAN card
4. Install the
WLAN
card.
5. Install the
3-cell battery
6. Install the
base
cover.
7. Follow the procedure in
Power button with fingerprint reader (optional)
Removing the power button with optional fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
(optional).
or
4-cell
battery.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
59
Advertisement
Table of Contents
