Dell P138G Service Manual page 122

Table 7. System setup options—Integrated Devices menu (continued)
Integrated Devices
Unobtrusive Mode
Enable Unobtrusive Mode
Table 8. System setup options—Storage menu
Storage
SMART Reporting
Enable SMART Reporting
Drive Information
M.2 PCIe SSD-1
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 9. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Full Screen Logo
Table 10. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Enable UEFI Network Stack
Wireless Device Enable
WWAN/GPS
122 BIOS setup
By default, the Enable Fingerprint Reader Device option is enabled.
Enable or disable all the computer light and sound.
By default, the Enable Unobtrusive Mode option is disabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the M.2 PCIe SSD-1 type information of the computer.
Displays the M.2 PCIe SSD-1 device information of the computer.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable to set screen brightness when the computer is running on battery
power.
Enable to set screen brightness when the computer is running on AC power.
Enable or disable full screen logo.
By default, the option is not enabled.
Controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Enable or disable UEFI Network Stack.
By default, the Enable UEFI Network Stack and Enabled w/PXE option are
enabled.
Enable or disable the internal WWAN/GPS device