Installing The Lower Triple Clamp - KTM 350 SX-F 2021 Owner's Manual

11.12

Installing the lower triple clamp

–
Remove O-ring
–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
F01560-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
S02307-10
(SX‑F EU/US, XC-F US)
–
Position the upper triple clamp with the handlebar.
–
Mount screw
F01562-10
–
Position the fork legs.
Air bleeder screw
to the front.
Valve
H01182-11
SERVICE WORK ON THE CHASSIS 11
4
.
5
.
p. 149)
1
2 3
and O-ring
4
, but do not tighten yet.
5
of the right fork leg is positioned
A
of the left fork leg faces the front.
is correctly posi-
.
57