11 . Use screwdriver to orient auger shaft to align with motor
shaft keyway (Fig . 30 .1) .
12 . Install key into keyway (Fig . 30 .2) .
13 . Install spacer, ensure that key is captured in slot
(Fig . 31 .1) .
14 . Insert screwdriver into groove of auger shaft and pry shaft
outwards (Fig . 32 .1) .
15 . Insert retainer into groove (Fig . 32 .2), ensure that retainer
is aligned with hole in spacer .
Sparkling Water and Ice Dispenser 7CI100A/7FS100A, 15CI100A/15FS100A
Fig . 30
2
1
Fig . 31
1
Fig . 32
1
2
29