Table of Contents
Advertisement
10 . Unplug the gear motor (three connectors) (Fig . 18) .
11 . Remove ground screw connection .
12 . Remove gear motor:
§ Remove M6 allen screw, retainer, spacer and key (Fig . 19 .1) .
§ Remove two M6x90 allen screws (Fig . 19 .2) .
§ Pull gear motor from auger (Fig . 19 .3) .
§ Remove main housing insulation (Fig . 19 .4) .
13 . Remove all traces of Petrol-gel from auger shaft .
14 . Remove compression nozzle:
§ Loosen hose clamp (Fig . 20 .1) .
§ Remove transport tube (Fig . 20 .2) .
Sparkling Water and Ice Dispenser 7CI100A/7FS100A, 15CI100A/15FS100A
Fig . 18
Fig . 19
2
3
1
2
Fig . 20
2
4
1
25
Advertisement
Table of Contents
