4. Ensure that the fan assembly is aligned with the chassis vents according to
the fan assembly instruction.
5. Secure the motherboard with a minimum of eight-to-ten screws.
Connecting Cables and
Setting Switches
This section takes you through all the connections and switch settings necessary
on the motherboard. This will include:
Power Connections
24-pin ATX power (
8-pin ATX 12V power (
Auxiliary power for graphics (
Internal Headers
Front panel
IEEE 1394a
USB Headers
Audio
Speaker
COM
FDD
IDE
Serial ATA II
Chassis Fans
Rear panel USB 2.0 Adapter
Expansion slots
CMOS jumper settings
See Figure 1 on page 11 to locate the connectors and jumpers referenced in the
following procedure.
)
P WR1
)
P WR2
)
P WR3
H ardware Installation
17