Table of Contents
Advertisement
If you use upper and under plates for the cassette other than those with the part numbers 40218943
an40218644, machine them as shown below to install them to the cassette asm. (40218942).
Diameter of the mounting hole is the dimension for the case where M3 flat head screws (JUKI part
number: SM1030601SC) are used and the material thickness is 1 mm.
Mounting hole
Detailed dimensions of the mounting hole
(Reference)
Dimensions of the hole position for the cassette asm. (40218942)
Mounting hole for the
cassette under plate
Detailed sectional view of the mounting
hole for the cassette under plate
Undercut for
the chuck base
mounting screw
Mounting holes
Mounting hole for the
for hinges
cassette under plate
– 3 –
origin
Mounting holes
for hinges
Undercut for
the chuck base
mounting screw
Mounting hole for the
cassette under plate
Advertisement
Table of Contents
