Table of Contents
Advertisement
4-4. Setting the ports
Ports can be set in the steps of procedure described below.
A
＜ List screen ＞
＜ Port setting screen ＞
C
B
＜ Port selection screen ＞
1)
Displaying the port setting screen.
Keep
on the pattern setting screen to display the list
(maintenance personnel level).
Press the "Port setting" button A to display the
port setting screen.
2)
Select the type of port you want to change on
the port setting screen to display the port selec-
tion screen.
3)
Carrying out setting of the ports
When the port selection screen is displayed,
D
the terminal name B, function number C and
active level D are displayed.
Press the Select button for the terminal name
you want to edit to display the edit screen.
Set the function number and the active level.
– 12 –
key held pressed for six seconds
Advertisement
Table of Contents
