Changing Radio Type - Pioneer DMH-2660NEX Operation Manual

1) After 3 seconds of turning the key on, press and hold the Volume
Down button on the steering wheel until the LED on the ASWC-1
goes solid.
2) Release the Volume Down button; the LED will go off indicating we
are now in Changing Radio Type mode.
3) Refer to the Radio Legend (p. 13) to know which radio number you
would like to have programmed.
4) Press and hold the Volume Up button until the LED goes solid, then
release. Repeat this step for the desired radio number you have
selected.
5) Once the desired radio number has been selected, press and hold
the Volume Down button, on the steering wheel, until the LED goes
solid. The LED will remain on for about 3 seconds while it stores the
new radio information.
6) Once the LED goes off the Changing Radio Type mode will end. You
can now test the steering control wheel controls.
Note: If at any time the user fails to press any button for a period
longer then 10 seconds this process will abort.
ASWC-1 Installation

Changing Radio Type

12