Radio; Starting Procedure; Storing The Strongest Broadcast Frequencies; Displaying The "Radio Settings" Screen - Pioneer AVH-X7800BT Operation Manual

Radio

Displays the preset channel list.
Select an item on the list ("1" to "6")
to switch to the preset channel.
Selects the FM1, FM2, FM3,
MW or LW band.
Radio
1
6/10
2
FM1 MW
Abcdefghi
3
Abcdefghi
4
Abcdefghi
5
Seek
6
Performs manual tuning.
Performs seek tuning or
HOLD
non stop seek tuning.
Releasing the key in a few seconds, skips
to the nearest station from the current
frequency.
Keeping holding the key for a long
seconds, performs non stop seek tuning.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
HOLD
frequency to a key.
Stores song information to an iPod.
 Refer to Storing song information to an iPod
(iTunes Tagging) on page 44
p By pressing or , you can also switch the preset
channels.
p By pressing and hold or
also perform seek tuning.
18
p By keeping touching and holding
non stop seek tuning. Touch again to cancel.
p The band (MW or LW) indicated on the band touch panel key
automatically switches according to the range of frequency
you are currently tuned in to.

Starting procedure

21 48
1 Display the "AV source selection" screen.
2 Touch [Radio].
The "Radio" screen appears.
Storing the strongest broadcast
frequencies
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys "1" to "6".
p Storing broadcast frequencies with BSM may replace those
you have already saved.
p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch
2 Touch
While the message is displayed, the six strongest broadcast
frequencies will be stored under the preset tuning keys in order
of their signal strength.
 If you touch [Cancel], the storage process is
cancelled.
Displaying the "Radio settings"
screen
1 Display the "System" setting screen.
and release, you can
or , you can perform
.
to begin a search.
2 Touch [AV Source Settings].
3 Touch [Radio settings].

Tuning into strong frequencies

p This setting is available only when "Radio" is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Local].
3 Touch the item.
 Off (default):
Turns the seek tuning setting off.
 Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for
MW and LW to Level1 or Level2).
p The FM "Level4" (MW and LW "Level2") setting allows
reception of only stations with the strongest signals.

Setting the FM tuning step

You can switch the seek tuning step for the FM band.
The default setting is "100kHz".
p The tuning step remains at 50 kHz during manual tuning.
1 Turn the source off.
 Refer to Selecting a source on page 11
2 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
3 Touch [FM Step] to switch the step to "50kHz"
or "100kHz".
Switching the sound quality of
the FM tuner
p This function is available only when you receive the FM band.
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Tuner Sound] to select the item.
 Music (default):
Gives priority to the sound quality.

Talk:
Gives priority to noise prevention.