Figure 26
Note: As the chute mates with the deck, make sure the
edge of the chute is under the lip of the clip assembly
installed previously.
3. On the top of the chute, engage the hook shaped latch
around pivot rod of the deflector assembly as shown
in
(Figure
27).
3
1
G005850
Figure 27
1. Chute
2. Deflector
4. Secure the chute to the 50 inch deck by hooking the
flexible latch on the chute to the retaining clasp welded
on the mower deck
(Figure
G015204
2
4
3. Latch, hook
4. Pivot rod
28).
3
1. Chute
2. Flexible latch
14
2
G005756
Figure 28
3. Retaining clasp
1