Windows Xp - SMC Networks SMC2862W-G EZ Connect User Manual

Driver Installation - Option 2
Note:
Step 6:
Click [Finish] to initialize the adapter.

Windows XP

Step 1:
2.4GHz 54 Mbps Wireless USB 2.0 Adapter in your machine and
turned it back on, the Operating System will automatically recognize
the adapter and prompt you for the appropriate drivers. Select
[Install from a list or specific location] and click the [Next] button
to begin the installation.
Step 2:
in the search] option. Make sure the [Search removable media]
option is not checked. Click [Browse] and find the location of the
drivers. This should be x:\driver. (Note: The x equals the letter of
your CD-ROM drive. In most cases, this is D.) Then click [Next].
Step 3:
copied to the hard drive and installed. Please click [Finish]
to exit the wizard.
After clicking [Finish], you will see the following message in your
system tray:
12
If the system could not find the drivers, click the
[Back] button, and select the [Display a list of the
known drivers...] option. Select [Network Adapters]
from the list of devices, press [Have Disk] and once
again browse to the location of the drivers.
You have now completed the driver installation.
After you have inserted the EZ Connect™ g SMC2862W-G
Insert the Driver CD and check the [Include this location
This process will be completed once the drivers are