Table of Contents
Advertisement
SMCWUSBT-G2 Utility
To use the WPA function, take the following steps:
1. Select Security Type, WPA-PSK/WPA2-PSK from the
drop-down menu.
2. Type in the WPA Passphrase (Pre-Shared Key: PSK).
3. Select ASCII or Hex in the Key Type field
4. Click Apply Change to allow the settings to take effect.
Note:
The WPA Passphrase character limit needs to be between
8-63 characters.
Manual Pre-Shared Key supports up to 64-Hex characters. If
there is no authentication server on your SOHO network, you can
issue the Pre-Shared Key to the adapter that is connected to the
access point. Be sure to use the same key for the wireless access
point and the connected adapter.
24
Advertisement
Table of Contents
