Table of Contents
Advertisement
Configuration
point, or to Infrastructure for connections with an access point.
(See "Network Topologies" on page 32 for more information.)
Transmit Rate – Indicates the data transmission rate. Select an
appropriate transmission speed. Lower speeds will give better
range.
The SMCWUSBT-G2 supports 802.11b, 802.11g and 802.11g
turbo mode. SuperG is capable of Packet Bursting, Fast Frames,
Compression, and Dynamic or Static Turbo. 802.11g turbo mode
delivers the maximum operation speed of up to 108 Mbps. The
Wireless USB Adapter supports both Dynamic and Static Turbo
modes, and it is backwards compatible with non-Turbo (legacy)
devices. However, the 802.11g static turbo mode is only enabled
when all devices on the wireless network are also configured with
static turbo mode.
Power Save – To use this funtion, select the Enabled or Disabled
in the Power Save Mode drop-down menu, then click the Apply
Change button.
Security
The Security ON/Security OFF button indicates whether the
security function has been enabled or disabled.
Click the Security ON/Security OFF button to enable the
security function. (Default: Security OFF)
19
Advertisement
Table of Contents
