Advertisement
Tunnel from the Barricade Plus to another Barricade Plus or a Windows-based PPTP
Client.
Figure 1.1
User name: The name you want to use to identify a particular PPTP Client
Password: The password you wish to use to authorize a particular PPTP Client
Idle Time Out: When there is no activity for this amount of Idle Time, the Tunnel will be
broken
IP: Enter the LAN subnet of the remote network that will connect to this router. (i.e. – If
the IP's of clients on the remote network are 192.168.123.xxx, type in 192.168.123.0.
The last octet must always be zero because the PPTP Client is connecting to the entire
LAN subnet.)
Subnet Mask: Enter the subnet mask used on the remote network (i.e. – 255.255.255.0)
Gateway IP: This value must be 0.0.0.0 when configuring the Barricade Plus as a PPTP
Server
Client Setting –
PPTP Client: Leave this box unchecked when configuring a PPTP Server
Host: Check this box only if you will be using a Windows-based PPTP client to connect to
the Barricade Plus PPTP Server (Figure 1.1 shows Host as unchecked. Leave this
unchecked if you plan to have Barricade Plus PPTP Clients connect to this server)
Auto Reconnect: Check this box if you would like the PPTP Tunnel to be automatically re-
established if the connection is broken
Advertisement
