Advertisement
Figure 1.4
Step 6: You have completed the VPN client setup. Click [Finish] to exit.
Step 7: Go back into [My Computer] and click on the [Dial-Up Networking] link again.
You should now see the new VPN connection that you just configured. Go ahead and
double-click on the name of the connection.
Figure 1.5
Step 8: Enter the username and password that the Administrator of the remote network
has given you. Verify that the VPN Server field has the correct WAN IP address. Then
press the [Connect] button. (Note: Be sure to enter this correctly as you will NOT be
able to connect without the correct login data)
Once you are connected you should see two new monitor icons in the system tray, and
you will be able to access the computers on the remote network as if they were on your
local LAN. You can double-click on the two linked monitors to view properties of the VPN
Advertisement
