Advertisement
Step 12
SO25 ctr
(28)
1
Lift and fasten a right and left gable,
under angle at corner, to the
door track and rear wall angle with
screws.
Hint: On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2
Fasten the single roof beam to the
outer gable leg as shown using bolts.
Hint: The holes along the length of
the beam must be on the top surface.
Repeat Step 1 for the opposite side
of building.
3
Join the left and right gables
together with a gable brace using
a bolt in the second hole from the
bottom only. Do this step for both
front and rear gables.
Repeat Step 2 for the opposite side
of building.
STEP
3
All manuals and user guides at all-guides.com
Gables/Roof Beams
(12)
6636 Gable Brace
Parts Needed For
Nut and bolt
at rear of building.
25
Left Gable Assemblies (2)
Right Gable Assemblies (2)
Single Roof Beam Assemblies (2)
6636 Gable Brace (2)
STEP
1
Gable
10386 Roof Beam (Single)
STEP
2
Advertisement
