Arrow Storage Products CO1014 Owner's Manual page 23

Step 10
SO23 ctr
(18)
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both
door jambs.
1
Fasten the front wall channels
in their positions between the end of
the side wall channel and the corner
panel using screws. Do not put a
screw in the hole at the end behind
the door opening at this time.
2
Fasten a door jamb to the front
panel with two bolts, nuts and acorn
nuts, as shown.
3
Fasten the center of the door
jamb to the front wall panel and the
front wall channel with two screws.
4
Fasten the top of the door jamb
to the door track with two screws. Do
the same for the bottom into frame.
Repeat steps 2 through 4 for the
opposite door jamb.
All manuals and user guides at all-guides.com
Parts Needed For
Front Channel/Door Jamb
(4)
Acorn Nut
Hex Nut
Acorn Nut
9365
STEP
1
STEP
(2) bolts
2
Bolt
9369
STEP
4
23
9369 Door Jamb (2)
9365 Front Wall Channel (2)
INSIDE OF
BUILDING
TOP VIEW
Door Track
9369
Front Wall Channel
Cross-Section
TOP VIEW
Top View
Front Wall Channel
Screw
Screw
STEP
3
TOP VIEW
Door Track
Screw
Screw