Main work
–
Check throttle cable routing. (
–
Position the fuel tank and fit the two spoilers laterally to the
radiator.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
–
Attach the fuel tank breather hose to the fuel tank lid.
–
Mount and tighten screws
Guideline
Remaining screws,
F01541-11
chassis
(All SX‑F models)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K01034-11
–
Plug in connector
–
Remove the wash cap set. Thoroughly clean the plug-in
connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
valve!
–
F01611-11
Lubricate the O-ring and connect plug-in connection
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
(XC‑F US)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
F01565-11
SERVICE WORK ON THE CHASSIS 11
p. 77)
1
with the collar bushings.
M6
10 Nm (7.4 lbf ft)
2
with the rubber bushing.
M6
3
for the fuel pump.
2
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
4
10 Nm (7.4 lbf ft)
71