17 SERVICE WORK ON THE ENGINE
116
–
Remove screw plug
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and sealing surfaces.
E01241-10
–
Position oil screen
–
Position the pin wrench through the drill hole of the screw plug
in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
E01242-10
–
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
E01243-10
magnet
–
Remove screws
E01244-10
–
Pull oil filter
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and sealing surfaces.
E01245-10
3
4
with oil screen
4
with the O-rings on a pin wrench.
3
with the O-ring.
M20x1.5
1
with the magnet and a
M12x1.5
5
. Remove the oil filter cover with the O-ring.
6
out of the oil filter housing.
and the O-rings.
15 Nm (11.1 lbf ft)
20 Nm (14.8 lbf ft)