Initializing The Flash Rom Data - Yamaha SRCP30 User Manual

10-8 Using the internal flash ROM
10
28
10-

10-8-3 Initializing the flash ROM data

n
NOTE
The use of a flash ROM is supported in TPB Ver. 12.51 and later versions.
1) On the initial screen, press
2) Next, press (B.UP).
F2
3) Press (FROM).
F2
4) The ID number and auto load function setting
in the flash ROM appear on the screen.
Press (INIT) here.
F3
5) Following the message, press the emergency
stop button on the TPB.
6) A confirmation message appears asking
whether to initialize the flash ROM data.
To initialize the flash ROM, press
To cancel, press (no).
F2
7) This screen is displayed during initialization.
(SYS).
F3
(yes).
F1
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1PRM 2B.UP3INIT 4next
[SYS-B.UP]
select menu
1CARD2FROM
[SYS-B.UP-FROM]
FROM : 04.03.01
auto load : Invalid
2LOAD 3INIT
1SAVE
[FROM-INIT]
press EMG.button
[FROM-INIT]
initialize OK ?
1yes 2no
[FROM-INIT]
initializing ...