Panasonic KX-TGH263C Quick Manual page 5

TGH26xC_QG(en).fm Page 5 Wednesday, December 25, 2013 9:21 AM
Link to cell
Connecting/disconnecting the cellular phone
Auto connection to the Bluetooth devices (cellular phones or headset)
The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change
the interval (default: "1 min"), see the operating instructions.
L When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only
2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its
connection from other Bluetooth devices. To automatically resume the connection to Bluetooth
devices, leave the auto connection on.
Connecting/disconnecting the cellular phone manually
If you will not be using the paired cellular phone's link to cell feature temporarily (for example, you
do not want the unit to ring when your cellular line receives a call), you can disconnect your
cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the
base unit.
L Even if a paired cellular phone was disconnected from the base unit, if it is brought within the
base unit's range during the auto connection interval, it may automatically connect to the base
unit.
L A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit
again is unnecessary.
1
To connect/disconnect:
For CELL 1: {MENU} (right soft key) (6251 (A long beep sounds.)
For CELL 2: {MENU} (right soft key) (6252 (A long beep sounds.)
2
{OFF}
Cellular line only mode (If you do not use the landline) (Handset)
If you do not use the landline, set the cellular line only mode to use this unit more conveniently.
L If you turn on the "Cell line only mode", disconnect the telephone line cord from the base
unit. Otherwise the "Cell line only mode" cannot be activated.
1
{MENU} (right soft key) (157
2
To turn on:
{r}: "On" s {SELECT} s {r}: "Yes" s {SELECT}
To turn off:
{r}: "Off" s {SELECT}
5