Vox EBC200DBR1 User Manual page 15

Note: The safety distance between the hotplate and the cupboard above the hotplate should be at
least 760mm.
C
D
A(mm)
760
WARNING: Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In order to
avoid accidental touch with the overheating bottom of the hob, or getting unexpectable electric shock
during working, it is necessary to put a wooden insert, fixed by screws, at a minimum distance of
50mm from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not
blocked by the worktop when you put the hob into position.
• Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to
temperature not below 150°C, to avoid the unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an
temperature of 90°C.
A
B
E
B(mm)
50 min.
Max. 5 mm
C(mm)
20 min.
Min. 5 cm
Max. 5 mm
13
D
Air intake
Min.30mm
E
Air exit 5 mm