Table of Contents
Advertisement
C. Decorative Fronts
Only decorative fronts certified for use with this appliance
model may be used. Contact your dealer for a list of dec-
orative fronts that may be used. Once you have deter-
mined what kind of decorative front and finishing material
is going to be used on the fireplace, you may use the
table below which shows the decorative front models and
the finishing material thickness allowed.
DECORATIVE
FIT
FRONT
Simon
Inside
Overlap
Contour
Inside
Craftsman
Inside
58
FINISH MATERIAL
THICKNESS
FIGURE
0-6 Inches max.
1 inch or less
1-6 inches max.
0-6 Inches max.
Heatilator • CNXT4236IFT, CNXT4842IFT Installation Manual • 2515-980 Rev. R • 1/23
Finishing Material:
1 Inch Thick or Less
(Overlap Fit)
SEE
10.8
10.6
10.7
Finishing materials 1 inch maximum thick.
10.8
Stop finishing material flush with opening.
Figure 10.6 Finishing Material 1 Inch Thick or Less - Contour
1 in. MAX.
DOOR
FINISHING MATERIAL
(TOP EDGE)
NON-COMBUSTIBLE
FINISHING MATERIAL
Decorative Front
Advertisement
Table of Contents
