Motorola oC81 Series Service Manual page 33

Level 1 and 2 Service Manual
6809462A54
2. Using the pointed tweezers through the flip housing slot, depress the hinge
assembly to release the flip assembly from the front housing knuckle.
See Figure 19-1.
3. Tilt and slightly separate the flip assembly (Figures 19-2 and 19-3) from the
front housing. Carefully pull the speaker leads through the front housing
opening, then completely separate the housings as shown in Figure 19-4.
4. The hinge assembly can be removed by pulling it straight out of the flip
assembly. See Figure 19-4.
5. To replace, insert the hinge assembly into the flip assembly.
6. While carefully routing the speaker leads through the opening in the front
housing, insert the front housing hinge post into the flip housing.
7. Using the flat end of the disassembly tool, depress the hinge assembly and slide
the end of the hinge into the socket molded into the right housing knuckle. The
hinge assembly will snap into place when it is properly aligned with the socket.
8. Replace the touch screen display assembly, external keys, buttons, main board,
rear housing, antenna, SIM, and battery as described in the procedures.
March 21, 2003
Disassembly
33